WiFi RTU is a collection and control terminal device that uses WiFi wireless data transmission.The device uses ESP32 module, supports more free development and more flexible scenario applications, supports TCP, UDP, MQTT network protocols, and provides users with fully transparent data transmission mode.Support custom heartbeat package, registration package, data guide package, support through mountain cloud port, users do not need to set up a server, fully support industrial configuration application, users do not need to care about the complex network protocol, through the transparent serial port, you can send and receive wireless data, so that your device can access to the Internet anytime and anywhere.
WiFi RTU supports TCP and UDP message formats, which can be selected by users at will.The 4-channels analog output, 4-channels switch output and 4-channels relay output are suitable for most application scenarios and can solve the problem of data transmission for you without any wiring.WiFi RTU provides wireless data transmission and acquisition control wherever there is a WiFi network.
Base on ESP32 chip module,support for higher freedom of development and function expansion.
WIFI version RTU more suit the need of family and indoor scenario to control and monitor equipment.
4 digital quantity, 4 analog quantity input, 4 relay output.
Support center SDK programming and standard Socket programming.
Wide operating temperature range, working in -25 to +70°C environment.
Data interface uses RS485 communication interface, baud rate may choose, from 300 BPS to 115200 BPS, start/stop/parity can be selected.
Support center SDK programming and standard Socket programming.
Support the MIND IOT cloud.
Support virtual serial port, support access to a variety of configuration software.
Characters | Description | |
ower supply | DC6~36V | |
Power consumption | 12VDC power: | |
Peakcurrent:MAX1A(communicating) | ||
Work current:50mA-340mA | ||
idle:<50mA | ||
Network | WIFI | |
WIFI frequency | 2.412GHz-2.484GHz | |
Acquisition interface | Analog quantity input | 4 channels analog quantity 4-20ma/0-5V/0-10V/0-30V |
Relay output | 4 channels digital quantity input | |
Databit:7/8;parity check:N/E/O;stop bit:1/2 bit | 4 channel independent relay output | |
Maximum load current of relay:250VAC/30VDC@5A | ||
Serial port interface | RS485;rate:300-115200bps | |
Data bit:7/8;parity check:N/E/O;stop bit:1/2 bit | ||
Serial port (parameter configure) | Micro-USB;rate:300-115200bps; | |
Data bit:7/8;parity check:N/E/O;stop bit:1/2 bit | ||
Temperature range | -40℃~+85℃ | |
Humidity range | Relative humidity 95% | |
(no condensation) | ||
Physical character | Size:long:145mm wide:90mm high:40mm | |
weight:200g |
The pin layout as shown below:
It can connect with Cloud Intelligence, you can easily realize remote control/device monitoring/error or threshold alarming etc via this APP while needn't worry about the flexible and high-cost cloud server. And this APP is based on Alicloud server, which can automatically match your local Alicloud server so that the signal is also pretty stable.