- Non-contact automatic body temperature detection, brush human face and perform high-precision infrared human temperature acquisition at the same time, fast and high effect |
- Temperature measurement range 30-45 (℃) Accuracy ± 0.3 (℃) |
- Automatically identify unmasked personnel and provide real-time warning |
- Support temperature data SDK and HTTP protocol docking |
- Automatically register and record information, avoid manual operation, improve efficiency and reduce missing information |
- Support mid-range temperature measurement and real-time warning of high temperature |
- Support binocular live detection |
- Unique face recognition algorithm to accurately recognize faces, face recognition time <500ms |
- Support human motion tracking exposure in strong backlight environment, support machine vision optical wide dynamic ≥80dB |
- Adopt Linux operating system for better system stability |
- Rich interface protocols, support SDK and HTTP protocols under multiple platforms such as Windows / Linux |
- 7-inch IPS HD display |
- IP34 rated dust and water resistant |
- MTBF> 50000 H |
- Support 22400 face comparison library and 100,000 face recognition records |
- Support one Wiegand input or Wiegand output |
- Supports fog through, 3D noise reduction, strong light suppression, electronic image stabilization, and has multiple white balance modes, suitable for various fields |
Scene demand |
- Support electronic voice broadcast (normal human body temperature or super high alarm, face recognition verification results) |
Model | iHM42-2T07-T4-EN |
Hardware | |
Chipset | Hi3516DV300 |
System | Linux operation system |
RAM | 16G EMMC |
Image sensor | 1/2.7" CMOS IMX327 |
Lens | 4.5mm |
Camera Parameters | |
Camera | Binocular camera supports live detection |
Effective pixel | 2Mega pixel,1920*1080 |
Min. lux | Color 0.01Lux @F1.2(ICR);B/W 0.001Lux @F1.2 |
SNR | ≥50db(AGC OFF) |
WDR | ≥80db |
LCD | 7inch TFT monitor,resolution:600*1024 |
LCD display | 16:09 |
Face Recognition | |
Height | 1.2-2.2 M, angle adjustable |
Distance | 0.5-2 Meters |
View angle | Vertical ±40 degree |
Reco. Time | <500ms |
Temperature | |
Measurement temperature | 10℃- 35℃ |
Measurement Range | 30-45(℃) |
Accuracy | ±0.3(℃) |
Detect Distance | 0.3-0.8M(best distance is 0.5M) |
Detect time | <500ms |
Interface | |
Internet interface | RJ45 10M/100M Ethernet |
Weigand port | Support input/output 26 and 34 |
Alarm output | 1channel relay output |
USB port | 1USB port (Can be connected to ID identifier) |
General | |
Power input | DC 12V/2A |
Power consumption | 20W(MAX) |
Working temperature | 10℃ ~ 35℃(Thermal sensor) |
Humidity | 5~90%, no condense |
Dimension | 123.5(W) * 84(H) *361.3(L)mm |
Weight | 2.1 kg |
Column aperture | 27mm |
- The temperature measuring device should be used in a room with a room temperature between 10 ℃ -35 ℃. Do not install the temperature measuring device under the vent, and ensure that there is no heating source within 3 meters; |
- Personnel entering the room from a cold outdoor environment will affect the temperature measurement accuracy. The forehead temperature test should be performed after the forehead is unobstructed for three minutes and the temperature is stable; |
- The temperature read by the temperature measuring device is the temperature in the forehead area. When there is water, sweat, oil or thick makeup on the forehead or the elderly have more wrinkles, the read temperature will be lower than the actual temperature. Make sure there is no hair or clothing covering this area. |
NO. | Name | Mark | Instruction |
J1 | Wiegand output | WG OUT | Output recognize result or connect other WG input device |
J2 | Wiegand input | WG IN | Unavailable |
J3 | Alarm output | ALARM OUT | Switching alarm signal output |
J4 | USB | Connect ID or IC card reader | |
J5 | DC power supply | DC12V | DC10-15V power supply |
J6 | RJ45 | 10/100Mbps Ethernet port |